The HYCON Cut-off Saw PREMIUM cuts all types of concrete,
steel, brick wall, asphalt etc. The HYCON Cut-off saw is a
very sturdy tool intended for cutting even under the most
extreme conditions. It is completely unaffected by water and
dust, and all parts run in oil. The HYCON PREMIUM-saws
are build for hard use day after day - without breakdowns.
The fact, that the saw is always working and does not require
service means higher profits than with e.g. a petrol saw.
The saw stops automatically if the blade jams because of
the system pressure relief valve. The blade stops rotating
maximum 10 sec. after releasing the trigger. Assuring no
injury to the operator. The hydraulic cut-off saw from HYCON
can be used for horizontal and vertical cutting.
Hydraulic direct drive high quality motor assume a minimum
of service. Flushing water runs through body and hydraulic
motor for extra cooling and to keep all surfaces cold.
HYDRAULIC CUT-OFF SAW HCS16
Item no. HCS16, 20-40 l.p.m. 3030401
Disc size, mm ΓΈ400
Oil Flow, lpm 20-40
Working Pressure, bar 120
Max pressure, bar 172
Weight w/o hose/disc, kg 7.8
Cutting depth, mm 162
Noise level LPA dB 97
Noise level LWA dB 108
Vibration level, m/s <2.5
Periferial blade cutting speed, m/s 81
